M5 captive nut with multiple applications, mainly used for retaining bodywork

 2 in stock

AP8102375

Also fits Aprilia ALL

Fork dust seal for Kaifa fork

Two fork types are used on mark 1 V7 models, we recommend checking your old fork seal before opening. These dust seals are for the Kaifa fork

 2 in stock

 887886 MG887886

High pressure internal fuel line / submersible fuel line, suitable for immersion in petrol. You will need to cut this to length according to your model

Suitable for modern fuel. 100% ethanol resistant. High pressure fuel hose. This is designed for use submerged in petrol inside the fuel tank. See FUA00004 for pipe clips

 2 in stock

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover. Fits front calipers only on models listed above.

   2 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Kit of 4 black frame caps to tidy up the bolt heads for the pillion and exhaust footpeg hanger

Simple installation, lasting looks

 2 in stock

Retaining circlip for footpeg retaining pin

 2 in stock

AP8120573

Premium softstyle grey T-shirt printed with classic Moto Guzzi logo in white on the chest.

Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!

Sizing:

• S fits 34 - 36" chest
• M fits 38 - 40" chest
• L fits 42 - 44" chest
• XL fits 46 - 48" chest
• XXL fits 50 - 52" chest

 2 in stock

Set of leads for batter charging. Ring terminals for battery, 2 pin connector for charger to plug into. Often required if you charge more than one bike using your Motobatt Smart Charger

 2 in stock

Mesh silencer gasket, silencer bush or muffler gasket shim for exhaust joint between silencer and downpipe

2 exhaust bushes required per bike

 2 in stock

2B007137

Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder

NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060

 1 in stock